 |
Features
- This is a Glow Powered, Radio Controlled, Wood Construction,
- Pete-N-Poke Sport .40 Nostalgic Airplane.
- For Intermediate Modeler/Fliers.
- FEATURES: Modeled loosely on the 1920s-era, Model "A" Ford engine powered
- Pietenpol Air Camper homebuilt, and the popular Great Planes
- Slow Poke. This airplane offers smooth, slow flight with the
- potential to perform all basic aerobatics. Even if the plane is in
- a stall, it loses very little altitude before quickly recovering.
- Easy low-speed flight offers a relaxing change of pace from
- demanding sport planes.
- Precisely interlocking wood parts and photo-illustrated instructions
- speed assembly.
- Wing attachment at the flying field takes very little time. Simply
- plug the decorative struts into pockets built into the fuselage and
- wing, and secure the wing to the center cabane structure using
- three bolts. The struts are automatically aligned and locked
- into place.
- Long tail moment helps prevent ground loops, even inexperienced
- taildragger pilots can quickly master takeoffs and landings.
- Separate hatches located on the bottom front of fuselage, allow easy
- access to on-board radio gear and the fuel tank.
- Dual aileron servos add precision and authority for crisp,
- impressive maneuvers.
- Engine bolts onto a mounting plate with the proper right thrust angle
- built-in so no separate mount is required.
- Warranty: Great Planes Model Manufacturing Company guarantees this
- kit free from defects in both materials and workmanship at date
- of purchase.
- INCLUDES: All the wood to build the kit, 3/16" main landing gear wire, 3/32"
- tailgear wire, clear windshield material, photo illustrated
- instructions, full-size rolled plans, decals.
- REQUIRES: Engine: .40-.46cu in (6.5-7.5cc) 2-stroke w/Standard Muffler
- (Note: The 2-stroke mounts in an upright position.)
- or .40-.52cu in (6.5-8.5cc) 4-stroke w/Standard Muffler
- (Note: The 4-stroke mounts in an upright position.)
- Radio: 4 Channels
- Servos: 5 standard (1-throttle, 1-elevator, 1-rudder, 2-ailerons)
- Servo Extensions 6": 2 for ailerons
- Y-Harness: 1
- Covering: Two 6 foot rolls
- Misc. Items: Glow plug, 1/4" foam rubber padding, medium fuel tubing,
- 10oz fuel tank, fuel filter, propeller, 2.5" spinner, 3" main
- wheels, 1" tailwheel, 3/16" and 3/32" wheel collars, building and
- field equipment.
- SPECS: Wingspan: 59.5" (1510mm)
- Wing Area: 809.2 sq in (52.2 sq dm)
- Weight: 5.75lb (2.6kg)
- Length: 47" (1195mm)
- Wing Loading: 16.4oz/sq ft (50g/sq dm)
- Airfoil: Flat Bottom, High Wing
- Center of Gravity: 3-7/8" (98mm) back from the leading edge of the
- wing.
- Control Throws- High Rate Low Rate
- Ailerons: Up & Down 1" (25mm) ¾" (19mm)
- Elevator: Up & Down 1½" (38mm) ¾" (19mm)
- Rudder: Right & Left 1½" (38mm) 1" (25mm)
- Incidence-
- Engine: 3° right thrust and 3° down thrust
- Wing: 1° positive
- Stabilizer: 0°
- COMMENTS: Pictured on box with Sapphire Blue and Cream MonoKote trim scheme.
- The checkerboard rudder area is Cream MonoKote with Sapphire Blue
- squares ironed in place to form the checkerboard pattern.
- Decal sheet PNP4D01 sold only through GP Manufacturing includes: JAL 12/7/00
- One 15" x 3-1/8" Black EC-02M ir/jl
- Two 6" x 1¼" Black EC-02M
- Four 2½" x ½" Black, Red and White Great Planes logos
- Two 3-3/8" x 1-1/8" instrument panels
- Two 7-1/8" x 1-3/4" Red & White Pete 'n Poke logos
- Two 7-1/2" x 1/4" Red & White stripes
- Two 2-7/8" x 5/8" White & Black Sport 40 logos
|
|
|
 |
|
 |
|
|
|
