 |
Features
- This is the radio controlled, electric powered,
- DogFighter Airplane Kit from Multiplex.
- For intermediate to advanced fliers.
- FEATURES: Construction: Elapor foam
- Wing: One-piece, detachable for easy transport
- Aileron Control: Dual servo
- Spinner: Elapor foam, 2.5" (63.5mm) diameter, black in color
- Decals: Two sheets, "Racer" or "Fighter" designs
- INCLUDES: DogFighter Airplane Kit with Spinner, two Decal Sheets, Linkages,
- Hardware and Instruction Manual
- REQUIRES: Radio: 6-channel
- Servos: Three micro (2-aileron, 1-elevator) one for optional rudder
- control if desired
- Extensions: Two 6" (150mm)
- Motor: Brushless, Multiplex makes a Brushless Motor Power Pack
- (MPUM9250) that includes a Himax Outrunner Brushless Motor with
- Mounting Hardware, ESC and 10x7 prop specifically for this kit
- Note, if using this Power Pack, three 4mm Female Bullet Connectors
- (GPMM3119) must be soldered to the ESC motor leads to connect the
- ESC to the existing connectors on the motor
- Battery: 3S LiPo, at least 2200mAh
- Battery Charger: Comptible with selected battery
- Connector for ESC to mate with selected battery, see COMMENTS
- Field equipment
- SPECS: Wingspan: 35" (889mm)
- Wing Area: 296 sq in (19.12 sq dm)
- Wing Loading: 14.6oz/sq.ft (42.7g/sq.dm)
- Fuselage Length: 32" (813mm)
- Weight: 30oz (850.4g)
- Center of Gravity (CG): 2.7" (68mm) from the leading edge of the
- wing at the fuselage side
- Control Throws-
- Elevator, Up and Down: 0.27" (7mm)
- Rudder, Left and Right: 0.79" (20mm)
- Ailerons, Up 0.55" (14mm), Down 0.31" (8mm)
- COMMENTS: When using the recommended FlightPower LiPo battery, solder a Deans
- Male Ultra plug, WSDM1302 to the ESC. This connector will plug into
- the Ultra Female plug on the FlightPower battery.
- This model is NOT made of styrofoam and it is not possible to glue
- Elapor foam using white or epoxy glue. Medium CA glue used with
- an activator is the only method of gluing recommended by the
- manufacturer.
|
|
|
 |
|
 |
|
|
|
