 |
Features
- Top Flite's Gold Edition P-51D combines Easy Construction with Scale Fighter
- Looks.
- FEATURES: Realistic scale details: Vacuum-Formed Canopy with Molded-In Relief
- Detail and Vacuum-Formed Exhaust Ports, Machine Gun Exits and Cowl-
- Halves molded from ABS are accurately reproduced and make it easy
- for the average modeler to achieve stunning results.
- The same Fine Quality Materials, Simplified Construction Methods
- and step-by-step Instructions as all Gold Edition kits.
- Two-piece, Molded Oil-Cooler Scoop seams on the centerline and has
- a die-cut internal structure for a very close to scale appearance.
- Two huge sheets of excellent, high quality decals included for "Big
- Beautiful Doll" scheme (but does NOT include the checkerboard
- cowl decal).
- Fuselage has a very accurate, exact scale outline with scale tail-
- wheel location.
- Fully-Sheeted Fully-Symmetrical Wing w/Excellent Flight Performance.
- INCLUDES: All Balsa and Plywood to Complete the kit, Clear Canopy, ABS Cowling
- and Detailing parts, Wire Landing Gear, Decals, Illustrated
- Instruction Manual, CAD-produced Rolled Plans, Pushrods, and
- Hardware.
- REQUIRES: .60-.90 (2-stroke) or .90-1.20 (4-stroke) Engine
- 4-6 Channel Radio (5th & 6th channels for retracts and/or flaps)
- 4-7 Servos
- Engine Mount, Fuel Tank, 4" Spinner, 3¼"-4" Main Wheels, 1¼"
- Tailwheel, Wheel Collars, Fuel Tubing, Foam Rubber, Building and
- Field Equipment
- Two Rolls of Covering (plus trim colors)
- SPECS: Wingspan: 65" CG: 3-7/8" back from Leading Edge Break
- Wing Area: 734 sq inches (LE break is point where LE goes from
- Weight: 8-10lbs steep sweep near fuse to shallow angle)
- Length: 56.5" (throws are listed below:)
- Wing Loading: 25 to 30oz/sq ft
- Scale: 1:7
- Degrees Incidence: Engine Thrust: 1.75° down, 1.6° right
- Stabilizer: 0°
- Wing: .5°
- Control Throws- High Low
- Elevator: 11/16" 7/16"
- Rudder: 1-1/8" 7/8"
- Ailerons: 11/16" 1/2"
- Flaps: 1-1/16" 1-11/16"
- COMMENTS: For Optional items use the following: *see below for long struts*
- Robart Pneumatic Retracts ROBQ0005
- Air Control Kit for Robart Retracts ROBQ2302
- Robart Hinge Points for the flaps ROBQ2509
- 100 psi hand pump and gauge ROBQ2363
- Robart Robostruts for landing gear, use ROBQ1705 and ROBQ1706.
- See Accessories Needed for additional items.
- See below for notes on cockpit kit.
- Cockpit Note: Unfortunately the tooling and design costs to make the
- engineering changes to the fuselage are prohibitive for the
- adaptation of a cockpit kit.
- As such, there is no cockpit/interior kit available for this model
- at this time. Per RTJ-PM,1999 AMC
- Though a .90 size engine will fit into this plane there is no
- in-cowl muffler that will work with a .90. 5/31/00
- upAXY 8/9/95
- Decal sheet P516D01 sold only through GP Manufacturing includes:
- Two 15" x 3¾" Black & Red WZ1
- 9" x 2" Black & Red Big Beautiful Doll
- 2¾" x 7/8" Col JD Landers
- 1¾" x ¾" Black & White crew listing
- 4-5/8" x 2-1/8" instrument panel
- Five 3/8" x ½" Red & White "Rising Sun" kills
- 30 3/8" x ½" Red, White & Black German kills
- Two 3¼" x 7/8" Black 472218
- Two 7/8" White & Black fuel inlets
- 2¼" x 5/8" Black air intake
- 1" Red & White circle
- 1/8" Black block letters:
- Caution! Replace Cover, Ammo Can Access, Gun Access (2), Aileron
- Servo Access, Aux. Equip. Access, Lockout Valve, Tie Down,
- Control Access, No Step (4), No Push (4).
- 1/16" Black block letters:
- No Push (4), No Step (4).
- Decal sheet P516D02 sold only through GP Manufacturing includes:
- Two 9-1/8" x 4-3/8" Blue & White stars and bars
- Two 12-1/8" x 6" Blue & White stars and bars
|
|
|
 |
|
 |
|
|
|
