 |
Features
- This is the Radio Controlled, Glow Powered, Balsa and Plywood
- Top Flite T-34B Mentor .60 Size 1/5th Scale Aerobatic Airplane Kit.
- For Intermediate to Advanced Modeler/Fliers.
- For almost 50 years the T-34 Mentor has been a primary trainer
- for new US Air Force and Navy pilots. Top Flite has produced
- this IMAA legal 1:5 scale kit that looks and performs just like the original.
- With its many scale touches, along with Gold Edition engineering
- to ease the building process, this American classic will be a
- proud addition to your military model hangar.
- FEATURES: Construction: CAD engineered balsa and plywood.
- Wings: One-piece wood. Selig 3086 and 3087 airfoils deliver stability
- for smooth flight and basic aerobatics. Low wing configuration.
- Can be constructed with or without flaps
- Attaches to fuselage with two ¼-20 wing bolts
- Radio compartment: Spacious, plywood reinforced
- Cowling: Three-piece ABS plastic
- Canopy: Clear plastic one-piece. May be cut apart and made into a
- sliding canopy if desired.
- Cockpit features: Modeler may purchase the Scale Cockpit Interior
- (TOPQ8413) for added realism.
- Landing gear: Fixed
- Hardware: Pushrods, pre-bent wire wing and nose landing gear, wing
- bolts, all clevises and fasteners.
- Motor Mount: Two-piece adjustable glass filled nylon.
- Warranty: Top Flite Models guarantees this kit free from defects
- in both materials and workmanship at the date of purchase.
- INCLUDES: All wood to construct the airplane, pushrods, prebent main and nose
- gear, nylon adjustable engine mount, ABS plastic cowl and tail
- cone, hardware package, clear canopy, decals, photo-illustrated
- instructions, full-size rolled plans.
- REQUIRES: Engine: .60-.91 cu.in. (9.8-14.9cc) 2-stroke
- .90-1.20 cu. in. (14.9-19.6cc) 4-stroke
- Muffler: Pitts-Style is required so that the muffler conceals inside
- inside the cowling.
- Radio: 4-6 channel, 6-channel with servos for optional flaps
- Servos: 6-9 44 oz-in torque minimum (2-ailerons, 1-elevator,
- 1-rudder, 1-throttle, 1-steering). 2 needed for optional flaps
- Servo Extension: One 6" (152mm) for elevator and rudder
- Two 12" (305mm) for ailerons
- Y-Harness: One for aileron servos
- Covering: 3-4 6' rolls
- Misc. Items: 3.5" (89mm) main wheels, 2.75" (70mm) nose wheel, 2.75"
- (70mm) spinner, 14oz (420cc) fuel tank, glow plug, ¼" (6mm) foam
- rubber padding, 3'(914mm) medium fuel tubing, fuel filter, propeller,
- building and field equipment.
- SPECS: Wingspan: 80" (2032mm)
- Wing Area: 1025 sq in (66 sq dm)
- Weight: 10-14lb (4.5-6.4kg)
- Wing Loading: 22.5-31.5oz/sq ft (69-96g/sq dm)
- Length: 63" (1600mm)
- Airfoil: Semi-symmetrical, low-wing
- Center of Gravity: 6-3/8" (162mm) Back from the wing's leading edge
- at the fuselage sides.
- Control Throws- Low Rate High Rate
- Ailerons: Up & Down ½" (13mm) ¾" (19mm)
- Elevator: Up & Down 9/16" (14mm) 11/16" (17mm)
- Rudder: Right & Left ¾" (19mm) 1" (25mm)
- Flaps: Down-takeoff 1" (25mm)50% landing 2" (51mm)100%
- Incidence-
- Engine Down Thrust: 2°
- Engine Right Thrust: 2.5°
- Wing: +2°
- Stabilizer: +2°
- COMMENTS: The pilots shown inside the plane are not included
- A 4-Stroke engine is not recommended for this plane as it would
- protrude too far out of the cowl.
- The model shown on the box was covered in Top Flight Yellow MonoKote
- (TOPQ0203) and the Green trim was painted with Parma Faskolor
- Fasgreen (PARR4005).
- For Flaps, the following additional items are needed:
- Two Standard Servos (HCAM0149)
- One Y-Harness (HCAM2500)
- One package Robart #309 Super Hinge Points (ROBQ2509)
- For Retractable Landing Gear the following items are needed:
- Robart 630BNZ Retracts (ROBQ1620)
- Standard Air Kit (ROBQ2302)
- Extra Pressure Tubing (ROBQ2369)
- Tubing Connectors (ROBQ2395)
- 2-56 Ball Link set (GPMQ3840)
- 2-56 Pull-Pull Cable System (DUBQ1417)
- Two Screw Lock Connectors (GPMQ3870)
- Two ¼" Wheel Collars (DUBQ1200)
- One Nylon Clevis and Pushrod (GPMQ3770)
- Eight #4 x 3/8" (9.5mm) flat head sheet metal screws
|
|
|
 |
|
 |
|
|
|
